1. MICROWAVE OVEN FOR WASTE TREATMENT.
As an alternative to traditional fuel systems called "incinerators", characterized by large overall dimensions, high running costs and onerous operation, it is now possible to use advanced "green" equipment that makes the process simple and easy.
FMW1 is the new furnace. Which uses the principle of pyrolysis for the carbonization of organic residues in the complete absence of oxygen,so as to minimize the formation of smoke and emissions of toxic substances and dioxins into the air.
Heat is generated via a microwave system which acts on organic waste without combustion thanks to the oven chamber’s inert atmosphere. The process occurs quickly and in perfect safety, constantly monitored by a PLC that manages each working phase.
|Summary table||Furnace FMW1||INCINERATOR|
|Bureaucratic procedures||Streamlined and quick||complex|
|Overall dimensions||4 m2||7-8 m2|
|Post combustion smoke||Not necessary||Necessary|
|Recording parameters||Not necessary||Necessary|
|Consumption||6.5 kw, 7/8|
|Process||Extremely simple||Very complex|
|Cycle duration||3 hour||6-8 hour|
|Productivity capacity||20-25 kg batch||Approx 50 kg|
|Dimension||1110 x 1395 x 2350|
VM/MA Manual and automatic crushing mills.
- Solid, robust structure
- High capacity
- Easy to use
- Totally automated
- Compliance with required standards
The series of manual and automatic crushing mills for crushing various types of materials for the recovery of precious metal residues. These are typically used for pulverizing slag and ashes resulting for carbonation of worked gold residues, of crucible and refractory materials, and for the trituration of electronic components and printedcircuit boards; they are available in the version with manual or automatic unloading 0f scrap.
|MA 50 Automatic||MA 70 Automatic||VM/60P||VM/80P|
|Rotor diameter||150 mm||170 mm||160 mm||200 mm|
|Power||5.5 kw||7.5 kw||1.1 kw||2.2 kw|
|Supply line||400 v-50 Hz||400 v-50 Hz||400 v-50 Hz||400 v-50 Hz|
|Weight||1600 kg||2100 kg||380 kg||780 kg|
|Average productivity||22-27 kg/h||40-50kg/h||20-25 kg/h||70-80 kg/h|
|Crucible , borax Ceramic||7-9 kg/h||15-18 kg/h||4-6 kg/h||12-15kg/h|
VM/MX Series Mixers for mixing powder
The VM/MX series of mixers is the ideal solution for mixing powders of dry materials processed with the crushing mills. Furnace slag, ashes resulting from carbonization of worked gold residues, powder from crucibles and refractory materials, or from the trituration of electronic components and printed circuit boards, once pulverized, are mixed to obtain homogeneous products ready to be tested or amalgamated with other components to obtain new compounds.
Inside an AISI 304 stainless steel chamber (316 on request), a system of discontinuous blades having a double concentric coil mounted on a shaft with cast iron supports creates a counter-convergent motion of mass capable of mixing materials of different specific weight and carrying the product to the discharge nozzle. The process is fast and efficient, and can also be applied to granular products.
The VM/MX mixers may be equipped with optional components like electro pneumatically controlled exhaust vent, electronic weighing system with load cells, or dosage programmers with digital or computerized display. The VM/MX mixers are compliant with the required international.
|Technical data||MX 5||MX 10||MX 20|
|Capacity||50 lt.||100 lt.||200 lt.|
|Power||1.5 kw||2.25 kw||3 kw|
|Power supply||400 v – 50 Hz||400 v – 50 Hz||400 v – 50 Hz|
|Weight||150 kg||280 kg||450 kg|
|Dimensions||1000 x 400 x 1150||1200 x 600 x 1250||1600 x 650 x 1650|