1.FURNACE FOR CONTINUOUS ANNEALING OF WIRES AND STRIPS:

The LINX electric furnaces are designed for continuous annealing and deoxidation. With one, two    or  four fully independent working lines, each one with uncoiling unit, heating and cooling camber, tensioning unit, possibility to work materials of different profiles and alloys, pre- arrangement for built-in ammonia gas dissociator or for hydrogen and nitrogen gas.

 

 

 

 

 

 

Advantages

  • Maximum quality of the product thanks to possibility of a repastable and effective heat treatment.
  • Consistent result
  • Oxidation-free treatments
  • Independent working temperature control for each working line
  • Possibility to treat simultaneously in multiple lines profiles of different sections and alloys.
  • Total absence of traction-induced tension in the product during the whole heat treatment.
  • Lower power and gas consumption
  • Reduced heat wasting in the working environment.
  • Active and passive safety.

 

MODEL

LINX L 101

LINX L 102

LINX L 102 N

LINX L 104

LINX L 104N

Chamber diameter

28mm

28mm

28mm

28mm

28mm

Heating chamber length

1000m

1700mm

1700mm

1700mm

1700mm

Heating zones

1

1+1

1+1

1+3

1+3

Working lines

1

2

2

4

4

Wire production

yes

yes

yes

yes

yes

Strips production

Max 11mm

Max 2 mm

Max 11 mm

Max 2mm

Max 11mm

Maximum speed

50m/min

70m/min

70m/min

70m/min

70m/min

Maximum temp

950oC

950oC

950oC

950oC

950oC

On request

 

1100oC

 

1100oC

 

Furnace heating power

3kw

7kw

10kw

7kw

15kw

18kw

15kw

On request

1.8kw

2.5kw

2.5kw

4kw

4kw

Voltage

230v

50/60 Hz

1ph

230/400v

50/60 Hz

3ph

230/400v

50/60 Hz

3ph

230/400v

50/60 Hz

3ph

230/400v

50/60 Hz

3ph

Dimensions

320x63x140h cm

484x70x155h cm

510x70x155h cm

504x70x179h cm

560x70x195h cm

Weight

430kg

110kg

1230kg

1550kg

1690kg

 

 

 

 2.  CONVEYOR BELT FURNACE FOR SINTERING:

Belt furnaces with multiple independent heating and cooling zones in line complete with special cavity cooling chamber, for the continuous sintering under deoxidizing atmosphere of sintered diamond beads for the productions of diamonds wires to cut marble and granite and for sintered diamond sectors, etc.

 

 

 

 

 

 

 

 

 

 

 

Advantages

  • Electric control panel incorporated in the furnace.
  • Excellent energy performance with 50% electricity consumption.
  • Constant temperature all along the muffle.
  • Muffle made of refractory steel alloy for high working temperature
  • Various possibilities in the use of the gas
  • Up to 40% of deoxidizing gas consumption
  • Working environmental friendly chimneys to burn gas
  • Repeatable working cycles
  • High speed of sintering and brazing

Compliance with CE regulation for industrial furnaces.

 

MODELS

BF 100

BF 120

BF 180

BF 240

MAX TEMP.

1150 °C

1150 °C

1100 °C

1100 °C

MUFFLE SECTION

100 x 50 h mm

130 x 60 h mm

180 x 90 h mm

240 x 90 h mm

USEFUL BELT WIDTH

90 mm

110 mm

160 mm

220 mm

SPEED OF THE BELT

max 900 mm/min

max 900 mm/min

max 900 mm/min

max 900 mm/min3

HEATING ZONES

3

3

3/4

3/4

HEATING CHAMBER LENGTH

2100 mm

2100 mm

3000 mm

3000 mm

DIMENSIONS

660x115x180 h cm

660x115x180 h cm

900x144x214 h cm

900x144x214 h cm

ELECTRIC SUPPLY

230/400 V

50/60 Hz (3 ph)

230/400 V

50/60 Hz (3 ph)

230/400 V

50/60 Hz (3 ph)

230/400 V

50/60 Hz (3 ph)